FH-10 is an integrated fan hub which is capable of powering up to 10 fans (3-pin or 4-pin) , while occupying only one 4-pin motherboard header which can be either system fan or CPU fan.
If non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at full speed.
If PWM fans are connected to this fan hub, speed of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO, not the same speed. Only speed of Fan 1 can be identified by the system.
Supports up to 10 Independent Fans
The ability to deploy up to 10 fans enables users to greatly expand cooling capability within the chassis and enjoy enhanced system performance.
PWM Function Design
All 4-pin PWM fans will run at the same DUTY RATIO, not the same speed. Only the speed of Fan 1 can be identified by the system.
3-pin Non-PWM fans will run at full speed.
Optimized Cable Management
Both Velcro and screw mountings are applicable.
Back side shows Fan numbers. Only the speed of FAN 1 can be identified by the system